New in 2009 the Club Round Frame Benches were designed in consultation with architects and specifiers to ensure we could provide a more aesthetically pleasing cloakroom bench with sealed frames to make as hygienic as possible yet remain cost effective so as to be fit for purpose in the current marketplace.

When you need perimeter seating for your changing room / dressing room that is strong and more pleasing on the eye this freestanding bench seat fits the bill perfectly.

The benches are 450mm high as standard for adults (400mm high for juniors and 350mm high for infants also available) with a unique steel seat support frame to provide additional strength in industrial / commercial use and available in three depths:
R bench — the standard cloakroom bench, it is 325mm deep with 3 seat slats.
R45 bench — 450mm deep with 4 seat slats and based on the Sport England guidelines with 25mm backset legs to reduce risk of stubbing toes.
R5D bench — slightly deeper at 500mm, also based on the Sport England / Football Foundation guidelines, it has 5 slats and is designed for use in disabled facilities or areas where you need a little more seat depth.

All benches are supplied part-assembled with just four bolts (8 bolts for 2.5m and 3m long benches) required to complete assembly — bolts, spanner, instructions included.

The 45mm diameter legs are fitted with plastic end caps as standard, but are available with RFFC floor fixing cleats (for secure fixing down) or RADJF adjustable feet (for uneven / sloping floors).

Shoe racks for the club benches are made from 20mm round tube, they are of sturdy construction to compliment the round legs of the benches perfectly.

The R range of benches are normally stocked in silver, 450mm high for rapid delivery (15 working days).

• Standard sizes: 1m, 1.5m, 2m, 2.5m, 3m
• Special sizes, heights, colours and installation available on request

• Slats are 75mm wide first quality ash, factory fitted to steel seat support frame
• Legs are 45mm round tube with a folded channel top plate
• If using floor fixing cleats remember to check there are no under floor heating pipes below bench legs before fixing
• All timber is sourced from FSC approved sources
• All steel is electro statically epoxy polyester powder coated to approx 60–80 microns, baked in an industrial oven and wrapped for protection during transport

* 450mm is the standard seat height for adults. Lower seat heights for boys and girls changing rooms are available at no extra cost. For infants, a seat height of 350mm is recommended and for juniors a seat height of 400mm is recommended.