The ‘DSX’ square frame double sided bench with hat and coat hooks is generally used in the centre of changing rooms as they have their own hat and coat rail mounted at 1.6m high between the vertical supports of the end frames, which makes it a self contained unit.
Supplied part-assembled with just twelve bolts (24 bolts on 2.5m and 3m) required to join the upright frames to the steel seat support frame and peg rail to complete assembly and a few screws to fix the SAA coat hooks to the pre-drilled hardwood rail (bolts, spanner, screws, screwdriver and instructions included).

The ‘DS’ double sided bench with hardwood top shelf and peg rail is a variation on the DSX bench with the addition of a 400mm deep Wood slat top shelf (with steel support frame for added strength) fixed by four additional bolts (8 on 2.5m and 3m) to the top of the vertical end frames.

The ‘DSM’ double sided bench with mesh top shelf and peg rail is another variation with the addition of a 400mm deep Mesh top shelf fixed by four bolts (8 on 2.5m and 3m) to the top of the vertical end frames.

Each bench measures 800mm deep x 1750mm high overall, with the seats either side of the bench measuring 325mm deep x 450mm high, comprising of three Ash hardwood 75mm slats factory fitted on a steel support frame for additional strength.

If you are looking for bench seating to comply with the Sport England or Football Foundation size guidelines please try our BCL Sport England Cantilever Wall fixed Benches, our R45 / R50 Freestanding Perimeter Benches, our RM Floor / Wall Fix Benching or our RDX Double Sided Aisle Benches.

The DSX range of benches WITHOUT top shelves are normally ex stock in blue for rapid delivery (10–14 working days).

• Standard sizes: 1m, 1.5m, 2m, 2.5m, 3m
• Special sizes, heights, colours and installation available on request

• If using floor fixing cleats remember to check there are no under floor heating pipes below bench legs before fixing
• Slats are 75mm wide first quality ash, factory fitted to steel seat support frame
• All timber is sourced from FSC approved sources
• Legs are 30mm square tube throughout and all steel is electro statically epoxy polyester powder coated to approx 60–80 microns, baked in an industrial oven and wrapped for protection during transport

* 450mm is the standard seat height for adults. Lower seat heights for boys and girls changing rooms are available at no extra cost. For infants, a seat height of 350mm is recommended and for juniors a seat height of 400mm is recommended.