The ‘SSX’ square frame single sided bench with hat and coat hooks is generally used around the perimeter of a cloakroom / changing room / locker room. They differ from the Basic and Mono range benches as they have their own hat and coat rail mounted at 1.6m high between the vertical supports of the end frames, which makes it a self contained unit with no need to fix to the building walls.

Supplied part-assembled with just eight bolts (16 on 2.5m and 3m) required to join the upright frames to the steel seat support frame and peg rail to complete assembly and a few screws to fix the coat hooks to the pre-drilled hardwood rail (bolts, spanner, screws, screwdriver and instructions included).

The ‘SS’ single sided bench with hardwood top shelf and peg rail is a variation on the SSX bench with the addition of a 190mm deep 2 slat Wood top shelf (with a steel support frame for added strength) fixed by four additional bolts (8 on 2.5m and 3m) to the top of the vertical end frames.

The ‘SSM’ single sided bench with mesh top shelf and peg rail is another variation with the addition of a 190mm deep Mesh top shelf fixed by four additional bolts (8 on 2.5m and 3m) to the top of the vertical end frames.

All benches measure 400mm deep x 1750mm high overall, with the seats being 325mm deep x 450mm high comprising of three Ash hardwood 75mm slats factory fitted on a steel support frame for extra peace of mind.

If you are looking for bench seating to comply with the Sport England or Football Foundation size guidelines please try our BCL Sport England Cantilever Wall fixed Benches, our R45 / R50 Freestanding Perimeter Benches, our RM Floor / Wall Fix Benching or our RDX Double Sided Aisle Benches.

The SSX range of benches WITHOUT top shelves are normally ex stock in blue for rapid delivery (10–14 working days).

• Standard sizes: 1m, 1.5m, 2m, 2.5m, 3m
• Special sizes, heights, colours and installation available on request

• If using floor fixing cleats remember to check there are no under floor heating pipes below bench legs before fixing
• Slats are 75mm wide first quality ash, factory fitted to steel seat support frame
• All timber is sourced from FSC approved sources
• Legs are 30mm square tube throughout and all steel is electro statically epoxy polyester powder coated to approx 60–80 microns, baked in an industrial oven and wrapped for protection during transport

* 450mm is the standard seat height for adults. Lower seat heights for boys and girls changing rooms are available at no extra cost. For infants, a seat height of 350mm is recommended and for juniors a seat height of 400mm is recommended.