| cloakroomseating.co.uk |  |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 Your basket is empty
|
|
Budget Range Changing Room Benches
Jump to: Complete Prices ↓ | Kit-Form Component Prices ↓
Basic Freestanding Benches
New for 2009 the Budget Freestanding Bench range with prices starting at just £69 per m (based on 3m heartwood bench) is ideal for the 'quick fix' market. When you need a cost effective solution to seating around the perimeter of your changing room / dressing room, the Budget range bench seating fits the bill perfectly. The finished benches are 450mm high x 315mm deep, if you are looking for bench seating to comply with the Sport England and Football Foundation size guidelines please try our BCL Sport England Cantilever Benches, our R45 or R50 Perimeter Benches or our RD Sport England Aisle Bench Seats.Order Perimeter Bench Seating online NOW! Top ↑ Select the relevant Order Reference code below for more information or to place an order while discounts apply.
Or they are sold in Kit form to enable you to easily call off the nearest components to suit your room dimensions and trim the wood on-site. Step 1: - Measure the length of your walls and divide them into sections not greater than 900mm to determine the number of legs you need - Choose your bench leg frames. 
BBL - Bench leg frames constructed from 30mm square box section complete with floor fixing cleats and a 70mm wide slat fixing plate mounted on top to accommodate three 70mm x 25mm seat slats 55mm apart. BBLPZ - Pre Zinc coated Bench leg frames (for additional rust protection in wet / humid locations) constructed from 30mm square box section complete with floor fixing cleats and a 70mm wide slat fixing plate mounted on top to accommodate three 70mm x 25mm seat slats 55mm apart. Step 2: - Establish the lengths of seat slats that will best suit your wall lengths - Choose your type of seat slat. 
ASH - Top quality 70mm x 25mm Ash hardwood (from FSC approved sources) round on the top 2 long edges, sanded, cleaned and finished with 2 part cellulose ac lacquer with 30% sheen level (sold in sets of 3). AHT - Is Ash hardwood from the heart of the same tree (why we call it 'Heartwood'), apart from the cost saving the wood has a slightly less consistent colour and more pronounced grain, which we actually prefer (sold in sets of 3). Please Note: Basic Leg frames must not be more than 900mm centres apart (EG: 1m = min 2 legs - 1.5m = min 3 legs - 2m = min 3 legs - 2.5m = min 4 legs - 3m = min 4 legs). They must always be fixed to the floor. Seat slats can overhang the centre of the end leg frames by up to 150mm. We recommend you allow 25mm clearance all round between walls and benches to allow for pipes / obstructions / uneven walls etc. If the ends of the slats are to be trimmed, they must be sealed to prevent moisture getting in. If you need matching wall mounted hat / coat hook rails for above your perimeter seating try our discounted coat hook rails. Kit-form Component PricesTop ↑↑
The Budget Range of perimeter seating / benches are usually available ex stock (in silver only), for other colours allow upto 3 working weeks.
Jump to: Complete Prices ↓ | Kit-Form Component Prices ↓
Mono Wall / Floor Fix Benches
New for 2009 the Budget Wall Fixed Bench range with prices starting at just £65 per m (based on 3m heartwood bench) is ideal for the 'quick fix' market. When you need a cost effective solution to wall / floor fixed seating around the perimeter of your changing room / dressing room and a rear leg cannot be used, the Budget range wall bench seating fits the bill perfectly. The finished benches are 450mm high x 350mm deep, if you are looking for bench seating to comply with the Sport England and Football Foundation size guidelines please try our BCL Sport England Cantilever Benches, our R45 or R50 Perimeter Benches or our RD Sport England Aisle Bench Seats. Order Perimeter Wall Bench Seats online NOW! Top ↑Select the relevant Order Reference code below for more information or to place an order while discounts apply.
Or they are sold in Kit form to enable you to easily call off the nearest components to suit your room dimensions and trim the wood on-site. Step 1: - Measure the length of your walls and divide them into sections not greater than 900mm to determine the number of legs you need - Choose your bench leg frames. 
BML - Bench leg frames constructed from 30mm square box section complete with floor and wall fixing cleats and a 70mm wide slat fixing plate mounted on top to accommodate three 70mm x 25mm seat slats 45mm apart. BMLPZ - Pre Zinc coated Bench leg frames (for additional rust protection in wet / humid locations) constructed from 30mm square box section complete with floor and wall fixing cleats and a 70mm wide slat fixing plate mounted on top to accommodate three 70mm x 25mm seat slats 45mm apart. Step 2: - Establish the lengths of seat slats that will best suit your wall lengths - Choose your type of seat slat.
ASH - Top quality 70mm x 25mm Ash hardwood (from FSC approved sources) round on the top 2 long edges, sanded, cleaned and finished with 2 part cellulose ac lacquer with 30% sheen level (sold in sets of 3). AHT - Is Ash hardwood from the heart of the same tree (why we call it 'Heartwood'), apart from the cost saving the wood has a slightly less consistent colour and more pronounced grain, which we actually prefer (sold in sets of 3). Please Note: Mono Leg frames must not be more than 900mm centres apart (EG: 1m = min 2 legs - 1.5m = min 3 legs - 2m = min 3 legs - 2.5m = min 4 legs - 3m = min 4 legs). They must always be fixed to the wall and floor. Seat slats can overhang the centre of the end leg frames by up to 150mm. We recommend you allow 25mm clearance all round between walls and benches to allow for pipes / obstructions / uneven walls etc. If the ends of the slats are to be trimmed, they nust be sealed to prevent moisture getting in. If you need matching wall mounted hat / coat hook rails for above your perimeter seating try our discounted coat hook rails. Kit-form Component PricesTop ↑↑
The Budget Range of perimeter seating / benches are usually available ex stock (in silver only), for other colours allow upto 3 working weeks.
Jump to: Complete Prices ↓ | Kit-Form Component Prices ↓
Cantilever Wall Fixed Benches
New for 2009 the Budget Wall Fixed Cantilever Bench range designed to meet the Sport England and Football Foundation changing room guidelines for cloakroom benches, with prices starting at just £80 per m (based on 3m heartwood bench) this bench seat is ideal for the 'quick fix' market. When you need a cost effective solution to wall fixed seating around the perimeter of your changing room / dressing room without legs to enable easy cleaning and prevent stubbing of toes, the Budget range cantilever wall bench seating fits the bill perfectly. The finished benches are 450mm deep and 275mm high to enable the brackets to be set above any skirting and still obtain the 450mm seat height required. This type of bench is only for use on solid walls like Concrete block, where the construction is strong enough to take the full seat load when in use. Order Wall Fixed Bench Seating online NOW! Top ↑Select the relevant Order Reference code below for more information or to place an order while discounts apply.
Or they are sold in Kit form to enable you to easily call off the nearest components to suit your room dimensions and trim the wood on-site. 
Step 1: - Measure the length of your walls and divide them into sections not greater than 900mm to determine the number of legs you need - Choose your wall fixed cantilever brackets. BCL - Bench brackets constructed from 4mm folded plate predrilled to take the wall fixings and a set of four 70mm x 25mm slats of your choice 35mm apart (fixings and slats not included). BCLPZ - Pre Zinc coated Bench brackets (for additional rust protection in wet / humid locations) constructed from 4mm folded plate predrilled to take the wall fixings and a set of four 70mm x 25mm slats of your choice 35mm apart (fixings and slats not included). Step 2: - Establish the lengths of seat slats that will best suit your wall lengths - Choose your type of seat slat.
AHT - Is Ash hardwood from the heart of the same tree (why we call it 'Heartwood'), apart from the cost saving the wood has a slightly less consistent colour and more pronounced grain, which we actually prefer (sold in sets of 4). ASH - Top quality 70mm x 25mm Ash hardwood (from FSC approved sources) round on the top 2 long edges, sanded, cleaned and finished with 2 part cellulose ac lacquer with 30% sheen level (sold in sets of 4). Please Note: Cantilever bench wall brackets must not be more than 900mm centres apart (EG: 1m = min 2 brackets - 1.5m = min 3 brackets - 2m = min 3 brackets - 2.5m = min 4 brackets - 3m = min 4 brackets). Seat slats can overhang the centre of the end cantilever bracket by up to 150mm. We recommend you allow 25mm clearance all round between walls and benches to allow for pipes / obstructions / uneven walls etc. If the ends of the slats are to be trimmed, they nust be sealed to prevent moisture getting in. If you need matching wall mounted hat / coat hook rails for above your perimeter seating try our discounted coat hook rails. Kit-form Component PricesTop ↑↑
The Budget Range of perimeter seating / benches are usually available ex stock (in silver only), for other colours allow upto 3 working weeks. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Cloakroom Brochure.jpg "Cloakroom Benches Brochure; opens in a new window & requires Adobe Acrobat Reader™")
 Lockers Brochure.jpg "Lockers Brochure; opens in a new window & requires Adobe Acrobat Reader™")
| Home | About Us | Contact Us | Download Brochures | Sitemap | Customer Service |
|
CALL ESE TODAY ON 01603 629956 Fax: 01603 630113 Email: sales@versabench.co.uk |
|
All content / images / graphics (unless acknowledged separately) within this site is © copyright 2003-2010 and may not be copied / modified / distributed in any form or via any medium without written consent of Eastern Storage Equipment Limited. Any questions regarding copyright please email us at legal @ versabench.co.uk.
In addition to Manufacturing Cloakroom Equipment / Changing room Furniture, seating, benches, metal lockers, wooden lockers, locker room benches, flooring / matting
ESE have two other specialist divisions.... www.eseprojects.co.uk - and - www.esedirect.co.uk
We have supplied businesses in just about every corner of the UK and have extremely experienced field sales engineers available to visit customers in Norfolk, Suffolk, London, Cambridgeshire, Essex, Hertfordshire, Bedfordshire, Northamptonshire, Peterborough, Rutland, Lincolnshire, Nottinghamshire, Leicestershire, Derbyshire, Buckinghamshire, Cheshire, Staffordshire, Shropshire, Worcestershire, Warwickshire, Oxfordshire, Gloucestershire, Berkshire and now we also cover Kent, Sussex, Surrey, Hampshire, Herefordshire, Monmouthshire, Lancashire, Yorkshire, Wiltshire, Dorset, Somerset, Devon and Cornwall.
Wherever you are in the UK if you would like a visit or advice from our experienced team please call or email us today. |