Freestanding Benches - Changing Room Bench Seating

New for 2009 the Club Collection Round Frame Freestanding Benches were designed in consultation with architects and specifiers to ensure we could provide a more aesthetically pleasing cloakroom bench yet control the costs so as to be fit for purpose in the current market place.
When you need perimeter seating for your changing room / dressing room that is strong and more pleasing on the eye this freestanding bench seat fits the bill perfectly.

All benches are 450mm high as standard and available in multiples of 500mm lengths of up to 3m (1m - 1.5m - 2m - 2.5m - 3m) with the 2.5m and 3m sizes having three sets of legs instead of two. The 45mm diameter round tube legs are fitted with plastic end caps as standard, but are also available with floor fixing cleats (for secure fixing down) or adjustable feet (for uneven / sloping floors).

Top quality Ash seat slats 70mm x 25mm (from FSC approved sources) rounded on the top 2 long edges, sanded, cleaned and finished with 2 part cellulose ac lacquer with 30% sheen level are used to form the seats, which also have a unique steel support frame underneath to provide additional strength in industrial / commercial use.

The Club collection Basic Bench contains three depth variations.

R bench - is the standard cloakroom bench, it is 315mm deep with 3 seat slats as pictured at the top of this page.

R45 bench - is 450mm deep with 5 seat slats and based on the Sport England guidelines, with its 45mm dia round frame legs inset by 25mm from the front and rear to reduce the risk of users stubbing their toes.

R5D bench - is slightly deeper at 500mm and also based on the Sport England / Football Foundation guidelines, it still has 5 seat slats and is designed for use in disabled facilities or areas where you need a little more seat depth.

All bench types are supplied part-assembled with just four bolts required to complete assembly - bolts, spanner, instructions included (8 bolts for 2.5m and 3m long benches).

Shoe Racks for the Bench Seat variations are available made from 20mm round tube, they are of sturdy construction to compliment the round legs of the benches perfectly.

Other Options include - Pre Zinc coating for additional protection in wet/humid areas (approx 12.5% extra) - Ash Heartwood slats (approx 5% cheaper) - 350mm and 400mm Seat heights (at no cost).