Club Range Changing Room Benches

New for 2009 the Club Collection Round Frame Freestanding Benches were designed in consultation with architects and specifiers to ensure we could provide a more aesthetically pleasing cloakroom bench yet control the costs so as to be fit for purpose in the current market place.
When you need perimeter seating for your changing room / dressing room that is strong and more pleasing on the eye this freestanding bench seat fits the bill perfectly.

All benches are 450mm high as standard and available in multiples of 500mm lengths of up to 3m (1m - 1.5m - 2m - 2.5m - 3m) with the 2.5m and 3m sizes having three sets of legs instead of two. The 45mm diameter round tube legs are fitted with plastic end caps as standard, but are also available with floor fixing cleats (for secure fixing down) or adjustable feet (for uneven / sloping floors).

Top quality Ash seat slats 70mm x 25mm (from FSC approved sources) rounded on the top 2 long edges, sanded, cleaned and finished with 2 part cellulose ac lacquer with 30% sheen level are used to form the seats, which also have a unique steel support frame underneath to provide additional strength in industrial / commercial use.

The Club collection Basic Bench contains three depth variations.

R bench - is the standard cloakroom bench, it is 315mm deep with 3 seat slats as pictured at the top of this page.

R45 bench - is 450mm deep with 5 seat slats and based on the Sport England guidelines, with its 45mm dia round frame legs inset by 25mm from the front and rear to reduce the risk of users stubbing their toes.

R5D bench - is slightly deeper at 500mm and also based on the Sport England / Football Foundation guidelines, it still has 5 seat slats and is designed for use in disabled facilities or areas where you need a little more seat depth.

All bench types are supplied part-assembled with just four bolts required to complete assembly - bolts, spanner, instructions included (8 bolts for 2.5m and 3m long benches).

Shoe Racks for the Bench Seat variations are available made from 20mm round tube, they are of sturdy construction to compliment the round legs of the benches perfectly.

Other Options include - Pre Zinc coating for additional protection in wet/humid areas (approx 12.5% extra) - Ash Heartwood slats (approx 5% cheaper) - 350mm and 400mm Seat heights (at no cost).

New for 2009 the Club Round Frame Floor and Wall fixed Single leg Bench was designed in consultation with architects and specifiers to ensure we could provide a more aesthetically pleasing cloakroom bench yet control the costs so as to be fit for purpose in the current market place.
When you need perimeter seating for your cloakroom / changing room / dressing room and a rear leg on the bench seat cannot be used because obstructions are in the way, the strong and aesthetically pleasing mono bench seat fits the bill perfectly, and it meets the Sport England and Football Foundation size guidelines.

Benches are 450mm high and 450mm deep as standard and available in multiples of 500mm lengths of up to 3m (1m - 1.5m - 2m - 2.5m - 3m) with the 2.5m and 3m sizes having three sets of legs instead of two. The 45mm diameter round tube legs are fitted with floor fixing cleats (for securing to floor) and a cleat to fix to the wall.

Four quality Ash seat slats 70mm x 25mm (from FSC approved sources) rounded on the top 2 long edges, sanded, cleaned and finished with 2 part cellulose ac lacquer with 30% sheen level are used to form the seats, which also have a unique steel support frame underneath to provide additional strength in industrial / commercial use.

All benches are supplied part-assembled with just four bolts required to complete assembly - bolts, spanner, instructions included (8 bolts for 2.5m and 3m long benches).

Cloakroom Bench Options - Pre Zinc coating is available for use in shower rooms and swimming pools (approx 12.5% extra) - Ash Heartwood slats (approx 5% cheaper) - 350mm and 400mm Seat heights (at no cost).

New for 2009 the Club Collection Round Frame Single Sided Cloakroom Bench was designed in consultation with architects and specifiers to ensure we could provide a more aesthetically pleasing cloakroom bench yet control the cost so as to be fit for purpose in the current market place.
When you need perimeter seating with fixed hat and coat rails for your changing room / dressing room that is strong and more pleasing on the eye this freestanding bench seat fits the bill perfectly.

The Single Sided Benches are 400mm deep x 1750mm high (450mm high seat) as standard and available in multiples of 500mm lengths of up to 3m (1m - 1.5m - 2m - 2.5m - 3m) with the 2.5m and 3m sizes having three sets of legs instead of two. The 45mm diameter round tube legs are fitted with plastic end caps as standard, but are also available with floor fixing cleats (for secure fixing down) or adjustable feet (for uneven / sloping floors).

The Hat and Coat rail is mounted at 1600mm high between the uprights and is fitted with sturdy Satin Anodised Aluminium coat hooks on one side as standard, although powder coated steel hooks are available at extra cost. 1m bench 5 hooks - 1.5m bench 8 hooks - 2m bench 10 hooks - 2.5m bench 12 hooks - 3m bench 16 hooks.

Three quality Ash seat slats 70mm x 25mm (from FSC approved sources) rounded on the top 2 long edges, sanded, cleaned and finished with 2 part cellulose ac lacquer with 30% sheen level are used to form the seats, which also have a unique steel support frame underneath to provide additional strength in industrial / commercial use.

All benches are supplied part-assembled with just eight bolts required to complete assembly - bolts, spanner, instructions included (16 bolts for 2.5m and 3m benches).

Shoe Racks for Bench Seating are available made from 20mm round tube, they are of sturdy construction to compliment the round legs of the benches perfectly.

Backrests are also available for the seating, fixed at 250mm up from the seat slats the 4 rounded edge Ash backrest provides support for the users when leaning back on the bench , and we think they make the bench look complete.

Other Options include - Powder coated hat and coat hooks - Pre Zinc coating for use in shower rooms and swimming pools (approx 12.5% extra) - Ash Heartwood slats (approx 5% cheaper) - 350mm and 400mm Seat heights (at no cost).

Order Club Collection Single Sided Benches online NOW!

Select the relevant Order Reference code below for more information or to place an order while discounts apply.

New for 2009 the Club Collection Round Frame Double Sided Cloakroom Bench was designed to Sport England guidelines in consultation with architects and specifiers to ensure we could provide a more aesthetically pleasing cloakroom bench yet control the cost so as to be fit for purpose in the current market place.
When you need to form aisles / island seating for your changing room / dressing room that is strong and more pleasing on the eye this freestanding bench seat fits the bill perfectly.

The Double Sided Benches are 800mm deep x 1750mm high (450mm high seat) as standard and available in multiples of 500mm lengths of up to 3m (1m - 1.5m - 2m - 2.5m - 3m) with the 2.5m and 3m sizes having three sets of legs instead of two. The 45mm diameter round tube legs are fitted with plastic end caps as standard, but are also available with floor fixing cleats (for secure fixing down) or adjustable feet (for uneven / sloping floors).

The Hat and Coat rail is mounted at 1600mm high between the uprights and is fitted with sturdy Satin Anodised Aluminium coat hooks on each side as standard, although powder coated steel hooks are available at extra cost. 1m bench 10 hooks - 1.5m bench 16 hooks - 2m bench 20 hooks - 2.5m bench 24 hooks - 3m bench 32 hooks.

Three quality Ash seat slats on each side of the bench, 70mm x 25mm (from FSC approved sources) rounded on the top 2 long edges, sanded, cleaned and finished with 2 part cellulose ac lacquer with 30% sheen level are used to form the seats, which also have a unique steel support frame underneath to provide additional strength in industrial / commercial use.

Shoe Racks for Bench Seating are available made from 20mm round tube, they are of sturdy construction to compliment the round legs of the benches perfectly.

Backrests are also available for the aisle seating, fixed 250mm up from the seat slats the 4 rounded edge Ash backrest provides support for the users when leaning back on the bench, and we think they make the bench look complete.

Other Options include - Powder coated hat and coat hooks - Pre Zinc coating for use in shower rooms and swimming pools (approx 12.5% extra) - Ash Heartwood slats (approx 5% cheaper) - 350mm and 400mm Seat heights (at no cost).

Order Club Collection Double Sided Benches online NOW!

Select the relevant Order Reference code below for more information or to place an order while discounts apply.