Mono Wall / Floor Fixed Benches - Versa Range Changing Room Bench Seating
Mono Wall / Floor Fix Benches
The ‘M range’ square frame floor / wall mounted locker room bench seating is generally used where there may be obstructions on the changing room wall or floor (like radius tiled skirting, heating pipes etc) and a rear leg cannot be used, with Vers-a-Rail WH - hat / coat hook rails mounted on the wall above.
The Mono floor and wall fix bench is available in 1.2m, 1.5m, 1.8m as standard (and now 1m - 2m and with additional legs 2.5m - 3m).
The Bench Seats are 350mm deep x 450mm high with three Ash hardwood 70mm slats mounted 55mm apart on a steel seat support frame for extra strength / peace of mind.
The benches are supplied part-assembled with just four bolts required to fix the steel leg frames to the steel seat frame and complete assembly (bolts, spanner and instructions included but wall/floor fixings are not).
If you are looking for bench seating to comply with the Sport England or Football Foundation size guidelines please try our BCL Sport England Cantilever Wall fixed Benches, our R45 / R50 Freestanding Perimeter Benches, our RM Floor / Wall Fix Benching or our RDX Double Sided Aisle Benches.
Mono Wall and Floor fixed Bench options:
MSR - Unique M range 190mm deep Mesh Shoe Rack (to keep footwear off floor in wet situations).
Pre Zinc Coating to provide additional rust protection in humid / wet areas (12.5% extra).
Special lengths - depths - heights, corner units and continuous runs (on request).
Different slat sizes and one piece seats also available at extra cost.
Order Mono Wall Benches online NOW!
Top ↑
Select the relevant Order Reference code below for more information or to place an order while discounts apply.
Additional cost variations across the bench seat ranges include:
If you are using benches in swimming pool changing rooms, specify:
* Electro Zinc Plated then Powder Coated bench frames +30% (for additional protection in wet / humid areas) - OR -
* Stainless steel bench frames (best for use in hospitals, cleanrooms, swimming pools & shower rooms)
For pools we would also recommend specifying:
* Plastic Wood (waterproof & rot-proof - ideal for seats in wet areas) - OR -
* Compact laminate tops and seats (mainly for the above applications or if one-piece colour seats needed)
If you wish for a more cost effective standard changing room furniture solution, specify:
* Ash Heartwood hardwood slats (darker colour, more intense grain - cheaper but limited availability)
Or if you cannot find the size / type of cloakroom seating you need, enquire about our:
* Bespoke Design service providing cost effective solutions to meet your specific needs.
* Full Specialist Installation service for all our benches / seating and lockers.
Our most popular sizes of cloakroom seating / benches - coat rails are usually available ex stock (in blue only), for all other colours please allow up to 3 working weeks delivery.
If you have a more urgent requirement or need a specific delivery date, please contact us and we will try our best to accommodate.
Please Note:
Free UK Delivery on orders over £50 (excluding AB, BT, DD, GY, HS, IM, IV, JE, KW, PA, PH, ZE postcodes and Eire).
All benches are packed in semi-KD form but can be supplied fully assembled (subject to increased carriage).
Ash seat slats are supplied ready fitted to our unique steel seat support frames.
Every order is delivered complete with screwdriver / spanner*, instructions – as required -
* Vers-a-rail only needs a screwdriver for assembly.
Floor fixings are not supplied, but all other screws / bolts required for assembly are.
Ash hardwood is sourced from FSC approved agents who only harvest timber from responsibly managed and sustainable forests.
All our products come with a 12 month guarantee subject to fair wear and tear, (although we have some benches still in regular use that are more than 20 years old). If you require longer warranties or experience any problems please get in touch and we will always do our best to help you.
|