Cloakroom Clothes Racks & Garment Hanging Racks

The ‘FGR freestanding coat rack’ units with captive chrome hanging rail, mesh top shelf and shoe rack are commonly used in reception areas, public cloak rooms, changing rooms, locker rooms, drying rooms etc to store visitors or workers clothing, coats / bags etc in commercial premises.

The FGR garment hanging rack measures 480mm deep x 1750mm high overall and comes complete with a single captive Chrome hanging rail plus Mesh Top Shelf 300mm deep, Mesh Shoe / Bag rack 400mm deep.

Cloakroom clothing rails are available in nominal lengths of 0.9m - 1.1m - 1.4m - 1.7m and with 3 uprights 1.9m - 2.4m - 2.8m as standard (captive coat hangers not included but can be ordered separate).

They are Supplied part-assembled with just twelve bolts required to fix the shelf and shoe rack to the uprights to complete assembly (bolts, spanner and instructions included).

Coat Racks / Clothing Rails options include:

CAP - Steel captive coat hangers (slide over rail before assembly).
Special length coat racks / coat stands, continuous runs and even double sided racks(on request).
Pre Zinc Coating to provide additional rust protection in humid / wet areas (12.5% extra).

Order Coat Racks / Clothing Rails online NOW!

Select the relevant Order Reference code below for more information or to place an order while discounts apply.

	Freestanding Garment Units 1750mm high
Clothes Rack Width (mm)	Single Sided 480mm deep
	Order Ref	Now Just
900	FGR10M	£218.00
1100	FGR12M	£216.60
1400	FGR15M	£226.15
1700	FGR18M	£232.75
1900	FGR20M	£365.00
2370	FGR25M	£380.00
2770	FGR30M	£395.00
View the single sided N10 Specification sheet in PDF format.

Our most popular sizes of cloakroom seating / benches - coat rails are usually available ex stock (in blue only), for all other colours please allow up to 3 working weeks delivery.
If you have a more urgent requirement or need a specific delivery date, please contact us and we will try our best to accommodate.
Similarly if you need a specific size or specification of bench, please contact us as we can manufacture bespoke benches.

Please Note:
Delivery within mainland U.K. (excluding the highlands and islands) is included in our online prices, however VAT is NOT.
All benches are packed in semi-KD form but can be supplied fully assembled (subject to increased carriage).
Ash seat slats are supplied ready fitted to our unique steel seat support frames.
Floor fixings are not supplied, but all other screws / bolts required for assembly are.
We can also provide an on-site installation service at additional cost if required.

All our Ash hardwood is sourced from FSC approved agents who only harvest timber from responsibly managed and sustainable forests.
Every order is delivered complete with screwdriver / spanner^*, instructions – as required - ^* Vers-a-rail only needs a screwdriver for assembly.