Raised Locker Stands UK made

The ‘LS’ locker stands are designed to raise the lockers off the ground to make them more accessible and the floors easier to clean.

Locker Stands are available in depths, widths and heights to suit your particular lockers and they are best priced to suit each individual application to ensure a very cost effective solution.
However 'typical prices' are indicated online for smaller requirements.

To estimate your Locker Stand requirements - You always need 1 LS Locker Stand Starter then ADD as many single LSE Locker Stand Extensions to suit your individual locker runs, then ADD 1 LSEL Leg frame for every multiples of 3 LSE (or part of) you have added (or call us and we will do it for you).

They can be used with 1 door lockers, 2 door lockers, 3 door lockers and all standard metal lockers as well as golf lockers and are most economical when the lockers are in 'nests' of three / four wide.

Locker Stand options include:
Pre Zinc Coating to provide additional rust protection in humid / wet areas (12.5% extra).

We can also supply clothes lockers, golf club lockers, multi door lockers and associated cloakroom equipment.

Order Locker Stands online NOW!

Select the relevant Order Reference code below for more information or to place an order while discounts apply.

	Locker Stands
Order Ref	Description	Height	Now Just
LS	Locker stand starter unit, 3 lockers wide	180	£70.00
LSE	Extension Locker Stand - 1 locker wide	180	£10.50
LSEL	Leg frame for extension locker stand	180	£12.00
ADJF	Adjustable Foot for Square leg Bench Seats (each)		£1.70
View the locker stands N10 Specification sheet in PDF format.

Our most popular sizes of cloakroom seating / benches - coat rails are usually available ex stock (in blue only), for all other colours please allow up to 3 working weeks delivery.
If you have a more urgent requirement or need a specific delivery date, please contact us and we will try our best to accommodate.
Similarly if you need a specific size or specification of bench, please contact us as we can manufacture bespoke benches.

Please Note:
Delivery within mainland U.K. (excluding the highlands and islands) is included in our online prices, however VAT is NOT.
All benches are packed in semi-KD form but can be supplied fully assembled (subject to increased carriage).
Ash seat slats are supplied ready fitted to our unique steel seat support frames.
Floor fixings are not supplied, but all other screws / bolts required for assembly are.
We can also provide an on-site installation service at additional cost if required.

All our Ash hardwood is sourced from FSC approved agents who only harvest timber from responsibly managed and sustainable forests.
Every order is delivered complete with screwdriver / spanner^*, instructions – as required - ^* Vers-a-rail only needs a screwdriver for assembly.