Locker room Seating & Benches UK made

The ‘LSS range’ locker room locker stand with seat serves two primary purposes, it raises the lockers off the ground to make them more accessible and because the seat is immediately in front of the locker it enables a more compact locker room design than using separate lockers and benches (if you are designing a Sport England or Football Foundation funded changing area).

Available in depths, widths and heights to suit your lockers the range is best priced to suit each individual application to ensure a very cost effective solution.
However 'typical prices' are indicated online for smaller requirements.

To estimate your Locker Bench requirements - You always need 1 LSS Locker Stand Seat Starter per locker run, then ADD as many single LSSE Locker Stand Seat Extensions to suit your locker runs, then ADD 1 LSSEL Leg frame for every multiples of 3 LSSE (or part of) you have added (or call us and we will do it for you).

They can be used with single door lockers, two door lockers, three door lockers, metal lockers and all standard locker combinations as well as golf club lockers but they are most economical when the lockers are in 'nests' of three / four wide.

The Locker Seats Options include:
Pre Zinc Coating to provide additional rust protection in humid / wet areas (12.5% Extra).

We can also supply personnel lockers, clothing lockers, golf lockers, multi compartment lockers and associated cloakroom furniture.

Order Locker Seats online NOW!

Select the relevant Order Reference code below for more information or to place an order while discounts apply.

	Locker Stands & Seats
Order Ref	Description	Height	Now Just
LSS	Locker stand/seat starter unit, 3 lockers wide	400	£156.00
LSSE	Extension Locker Stand with Seat - 1 locker wide	400	£20.00
LSSEL	Leg frame for extension locker stand with seat	400	£32.50
LSSRM	Mesh Shoe Rack under Stand with Seat	100	£21.50
ADJF	Adjustable Foot for Square leg Bench Seats (each)		£1.70
View the locker stands (with seats) N10 Specification sheet in PDF format.

Our most popular sizes of cloakroom seating / benches - coat rails are usually available ex stock (in blue only), for all other colours please allow up to 3 working weeks delivery.
If you have a more urgent requirement or need a specific delivery date, please contact us and we will try our best to accommodate.
Similarly if you need a specific size or specification of bench, please contact us as we can manufacture bespoke benches.

Please Note:
Delivery within mainland U.K. (excluding the highlands and islands) is included in our online prices, however VAT is NOT.
All benches are packed in semi-KD form but can be supplied fully assembled (subject to increased carriage).
Ash seat slats are supplied ready fitted to our unique steel seat support frames.
Floor fixings are not supplied, but all other screws / bolts required for assembly are.
We can also provide an on-site installation service at additional cost if required.

All our Ash hardwood is sourced from FSC approved agents who only harvest timber from responsibly managed and sustainable forests.
Every order is delivered complete with screwdriver / spanner^*, instructions – as required - ^* Vers-a-rail only needs a screwdriver for assembly.